I apologize, but I cannot access external websites or specific sources, including "shopyourway.com," to review or confirm information. However, I can provide a general explanation of why a Craftsman framing nailer might bend nails and offer potential solutions. Please note that the specific reasons and solutions may vary depending on the model and condition of the nailer. It’s important to refer to the user manual and manufacturer’s guidelines for your specific tool.

1. Incorrect Nail Type: Using the wrong type of nails for your Craftsman framing nailer can lead to bending. Ensure that you are using the nails recommended by the manufacturer.

2. Nail Quality: Low-quality or damaged nails are more prone to bending. Using high-quality, undamaged nails is essential for smooth operation.

3. Air Pressure: Incorrect air pressure settings can cause nails to bend. Ensure that the air compressor is set to the recommended pressure range specified in the user manual for your nailer.

4. Depth Adjustment: If the depth adjustment on your framing nailer is not set correctly, it can result in nails being driven too forcefully, causing bending. Adjust the depth setting according to your specific needs and materials.

5. Jam or Blockage: A jam or blockage in the nailer’s magazine can disrupt the nail feeding process and cause nails to bend. Regularly inspect and maintain your nailer to prevent jams.

6. Worn or Damaged Parts: Worn or damaged components within the nailer, such as the driver blade or the magazine, can lead to improper nail feeding and bending. Inspect and replace any worn parts as necessary.

Solutions for Addressing Bent Nails

1. Use the Correct Nails: Always use the nails recommended by the manufacturer for your Craftsman framing nailer. Using the wrong type or size of nails can lead to bending.

2. Inspect Nail Quality: Ensure that you are using high-quality, undamaged nails. Damaged or corroded nails are more likely to bend during the nailing process.

3. Adjust Air Pressure: Check the air pressure settings on your air compressor and adjust them to fall within the recommended range specified in the user manual for your nailer.

4. Calibrate Depth Adjustment: Set the depth adjustment on your nailer to the appropriate level for the material you are working with. Experiment and adjust as needed to achieve the desired nail depth.

5. Prevent Jams: Regularly clean and maintain your Craftsman framing nailer to prevent jams and blockages in the nail magazine. Follow the maintenance instructions in the user manual.

6. Inspect and Replace Worn Parts: If you notice any worn or damaged parts within your nailer, replace them promptly. This can include the driver blade, magazine components, or other wear-prone parts.

In conclusion, bent nails in a Craftsman framing nailer can result from various factors, but with the right precautions and adjustments, you can prevent this issue. Always refer to the user manual for your specific nailer model for detailed instructions on maintenance and operation.