Paslode nail guns are renowned for their reliability and performance, but like any tool, they can encounter issues. One common problem is a nail jam or blockage. In this guide, we’ll walk you through the steps to unblock a Paslode nail gun, ensuring it’s back in working order in no time.
Tools Required:
- Allen Wrench or Hex Key Set
- Safety Glasses
- Flathead Screwdriver
- Pliers
Step 1: Safety First
Before you begin, always prioritize safety. Put on your safety glasses to protect your eyes from any potential debris.
Step 2: Disconnect Power
If your Paslode nail gun is cordless, remove the battery to ensure it won’t accidentally discharge while you’re working on it.
Step 3: Remove Remaining Nails
Make sure there are no nails left in the magazine. Disconnect the nail gun from the air compressor or remove any remaining fuel cell.
Step 4: Release Pressure
For pneumatic models, release any residual air pressure by depressing the tip against a scrap piece of wood. This ensures the tool is depressurized.
Step 5: Open the Magazine
Using the Allen wrench or hex key, remove the screws securing the magazine cover. Gently lift the cover to expose the nail chamber.
Step 6: Clear the Jam
Inspect the nail chamber for any obstructions or jammed nails. Use a flathead screwdriver or pliers to carefully remove any debris or bent nails.
Step 7: Check the Driver Blade
Ensure the driver blade is free from any bent or damaged nails. If necessary, straighten or replace it.
Step 8: Lubricate Moving Parts
Apply a small amount of pneumatic tool oil or Paslode lubricant to the moving parts, including the driver blade and feeder mechanism.
Step 9: Reassemble and Test
Carefully reattach the magazine cover and secure it with the screws. Reconnect the battery or fuel cell. Load a fresh strip of nails and test the nail gun on a scrap piece of wood.
Step 10: Fine-tune Depth Setting (Optional)
If the nail depth is not to your preference, adjust the depth setting according to the manufacturer’s instructions.
Conclusion
With these straightforward steps, you can unblock a Paslode nail gun and have it back in optimal working condition. Remember to always follow safety guidelines and consult the manufacturer’s manual for specific instructions related to your model. If you encounter any issues beyond a simple blockage, it’s advisable to seek professional assistance. With proper maintenance and care, your Paslode nail gun will continue to serve you well for many projects to come.