The Norge 4-in-1 18G Air Nailer Stapler is a versatile tool used for various fastening applications. This concise manual will provide you with clear and accurate information on the technical details, operation, and maintenance of this tool.

Technical Specifications

Nail and Staple Compatibility:

• Nail Gauge: 18-gauge nails.
• Nail Length: 5/8 inches to 2 inches.
• Staple Length: 5/8 inches to 1-5/8 inches.

Air Pressure Requirements:

• Operating Pressure: 60-100 PSI (pounds per square inch).

Magazine Capacity:

• Holds up to 100 nails or staples.

Weight:

• The Norge 4-in-1 18G Air Nailer Stapler weighs 3.4 pounds, making it lightweight and easy to handle.

Operation

1. Safety Precautions:

• Always wear appropriate safety gear, including safety glasses and hearing protection.
• Ensure the tool is disconnected from the air supply when not in use.
• Keep the tool pointed away from yourself and others at all times.

2. Loading Fasteners:

• Disconnect the tool from the air supply.
• Slide the magazine cover down.
• Load nails or staples into the magazine.
• Push the magazine cover up until it locks in place.

3. Adjusting Depth:

• Use the depth adjustment wheel to control how deep the fasteners are driven. Turn clockwise for deeper, and counterclockwise for shallower fastening.

4. Connecting to Air Supply:

• Connect the tool to an air compressor with an operating pressure of 60-100 PSI.

5. Operation:

• Aim the tool at the workpiece.
• Press the safety contact tip against the work surface.
• Pull the trigger to drive a nail or staple.
• Release the trigger to reset the tool for the next fastening.

6. Maintenance:

• Regularly lubricate the tool with pneumatic tool oil.
• Keep the tool clean and free from debris.
• Inspect and replace any worn or damaged parts as needed.

Uses

The Norge 4-in-1 18G Air Nailer Stapler is suitable for various tasks, including:

1. Trim Work: Installing baseboards, crown molding, and trim.
2. Furniture Assembly: Joining wooden components securely.
3. Cabinetry: Attaching cabinet backs, moldings, and drawer guides.
4. Upholstery: Fastening fabric and foam to furniture frames.

Remember to select the appropriate fastener (nail or staple) and adjust the depth setting according to your specific application.

Troubleshooting

If you encounter issues with the tool, such as misfires or jams, refer to the manufacturer’s troubleshooting guide provided with the tool. Ensure that you disconnect the tool from the air supply before attempting any maintenance or troubleshooting.

By following this manual, you can safely and effectively operate the Norge 4-in-1 18G Air Nailer Stapler and utilize its versatility for a variety of fastening applications. Always prioritize safety and proper maintenance for the best results and tool longevity.