The Bostitch N12 Roofing Nailer is a workhorse on job sites, but like any tool, it can benefit from occasional maintenance. A rebuild kit is a cost-effective solution to keep your nailer performing at its best. In this guide, we’ll provide accurate, clear, and concise information about the Bostitch N12 Roofing Nailer Rebuild Kit, including its technical details and the steps to rejuvenate your trusted tool.

Understanding the Bostitch N12 Roofing Nailer

Before delving into the rebuild kit, let’s briefly review the Bostitch N12 Roofing Nailer:

Technical Details of Bostitch N12 Roofing Nailer

1. Nail Type: The Bostitch N12 is designed to use 1-inch to 1-1/4-inch wire-collated coil roofing nails with a round head. These nails are commonly used in roofing applications.

2. Air Pressure: The recommended operating air pressure for the N12 is around 70-120 PSI (pounds per square inch).

3. Magazine Capacity: This nailer has a magazine capacity of approximately 400 nails, allowing for efficient and continuous operation.

4. Weight: The weight of the N12 Roofing Nailer is approximately 4.7 pounds, making it relatively lightweight and easy to handle.

Benefits of the Bostitch N12 Roofing Nailer

The N12 Roofing Nailer offers several benefits:

1. Efficiency: Its high magazine capacity and consistent nail feed make it a highly efficient tool for roofing tasks.

2. Durability: Bostitch is known for its durable construction, and the N12 is no exception. It’s built to withstand rugged job site conditions.

3. Precision: The N12 provides precise nail placement, thanks to its depth adjustment feature, reducing the risk of underdriving or overdriving nails.

4. Versatility: While it’s primarily used for roofing, it can also be used for siding and exterior trim work, adding to its versatility.

The Bostitch N12 Roofing Nailer Rebuild Kit

The Bostitch N12 Roofing Nailer Rebuild Kit is a set of replacement parts designed to bring new life to your trusted nailer. This kit typically includes:

1. O-rings: These rubber seals prevent air leaks and are essential for maintaining consistent nail driving power.

2. Gaskets: Gaskets help create proper seals and ensure that the nailer operates efficiently.

3. Driver Blade: The driver blade is the part that makes contact with the nail and drives it into the material. A replacement driver blade can significantly improve performance.

4. Bumper: The bumper, often made of rubber or similar material, absorbs the impact when the nailer is fired, protecting the internal components.

Steps to Rebuild Your Bostitch N12 Roofing Nailer

1. Disconnect: Ensure the nailer is disconnected from the air supply and that there are no nails in the magazine.

2. Disassembly: Carefully disassemble the nailer, removing worn or damaged parts.

3. Cleaning: Thoroughly clean all parts and components, removing any debris or residue.

4. Replacement: Install the new parts from the rebuild kit, including O-rings, gaskets, driver blade, and bumper.

5. Reassembly: Carefully reassemble the nailer, ensuring all parts are correctly in place.

6. Testing: Reconnect the nailer to the air supply and test its operation to ensure it functions correctly.

In conclusion, the Bostitch N12 Roofing Nailer Rebuild Kit is an affordable solution to extend the lifespan and maintain the performance of your roofing nailer. By following the steps outlined above and using this kit, you can continue to rely on your Bostitch N12 for precise and efficient roofing and other construction tasks.