The Bostitch N80SB-1 Framing Stick Nailer is a powerful and versatile tool widely used in the construction and carpentry industry. This manual provides clear and concise information on how to use and maintain this nail gun.

Technical Specifications:

1. Nail Compatibility: The N80SB-1 is compatible with 1-1/2 inch to 3-1/4 inch 20-degree plastic collated stick nails. This range covers a wide variety of framing and sheathing applications.

2. Operating Pressure: The recommended operating pressure for this nailer is between 70-120 PSI (pounds per square inch). Ensure that your air compressor is set within this range for optimal performance.

3. Magazine Capacity: The magazine of the N80SB-1 can hold up to 80 nails, reducing the need for frequent reloading and increasing productivity.

4. Depth Adjustment: This nailer is equipped with a depth adjustment feature, allowing you to control the depth at which nails are driven into the work surface. This feature is crucial for achieving the desired finish.

How to Use the N80SB-1 Framing Stick Nailer:

1. Load Nails: Open the magazine door and load the stick nails into the magazine. Ensure they are collated correctly and are the appropriate size for your task.

2. Adjust Air Pressure: Set your air compressor to the recommended operating pressure of 70-120 PSI.

3. Safety Precautions: Always wear appropriate safety gear, including safety glasses and hearing protection. Make sure the nailer is disconnected from the air supply when not in use.

4. Firing: Place the nailer on the work surface and press the nose against the material. Depress the trigger to drive the nail into the material. The depth of the nail can be adjusted by turning the depth adjustment dial.

5. Maintenance: After use, disconnect the nailer from the air supply, and clean it thoroughly to remove dust and debris. Regularly apply pneumatic tool oil to maintain smooth operation.

Safety Guidelines:

1. Always treat the nailer as if it is loaded and ready to fire.

2. Keep your hands and body away from the nail discharge area.

3. Do not point the nailer at anyone, and avoid unintentional firing.

4. Disconnect the nailer from the air supply when not in use.

5. Only use the nailer in well-ventilated areas and away from flammable materials.

6. Follow all local safety regulations and guidelines.

Conclusion:

The Bostitch N80SB-1 Framing Stick Nailer is a reliable and versatile tool for framing and sheathing applications. By understanding its technical specifications, following the usage instructions, and adhering to safety guidelines, you can make the most of this nail gun while ensuring safety in your work environment. This manual serves as a quick and efficient reference for both technical and non-technical users.