This article serves as a concise guide for the Campbell Hausfeld Framing Nailer NS349000. It will cover the essential technical details, operation, and maintenance of this powerful tool, making it accessible to both technical and non-technical audiences.

Technical Specifications

Power Source: The NS349000 is a pneumatic framing nailer, which means it operates using compressed air. It requires an air compressor with a minimum operating pressure of 70-120 PSI (pounds per square inch).

Nail Compatibility: This framing nailer is compatible with 20-22-degree plastic collated round head framing nails. The nail length should range from 2 inches to 3-1/2 inches, allowing versatility in various applications.

Magazine Capacity: The magazine can hold up to 60 nails, reducing the need for frequent reloading.

Firing Modes: The NS349000 offers both sequential and bump firing modes. Sequential mode involves a single trigger pull for each nail, while bump firing allows continuous nailing by holding the trigger and bumping the nose against the workpiece.

Operation

1. Air Connection: Connect the framing nailer to an air compressor using a suitable air hose. Ensure the air compressor’s pressure is within the recommended range (70-120 PSI) and that it has a clean, dry air supply.

2. Loading Nails: Open the magazine by sliding the latch and insert a strip of compatible nails. Close the magazine securely.

3. Adjust Depth: Adjust the depth setting according to the material you’re working with. Turn the depth adjustment wheel clockwise for deeper nail penetration and counterclockwise for shallower penetration.

4. Select Firing Mode: Choose between sequential and bump firing modes, depending on your preference and the specific application.

5. Safety Precautions: Always wear appropriate safety gear, including safety glasses and hearing protection. Keep your hands and body clear of the nailer’s nose and magazine.

6. Firing: To fire a nail in sequential mode, place the nose against the workpiece, press the trigger, and release. For bump firing, hold down the trigger and bump the nose against the surface to drive nails rapidly.

7. Maintenance: Regularly lubricate the nailer with pneumatic tool oil. Keep the magazine and nosepiece clear of debris and nails. Clean the air filter to ensure consistent performance.

Troubleshooting

If the nailer experiences issues such as misfires or inconsistent nail depth:

1. Check the air compressor’s pressure to ensure it falls within the recommended range (70-120 PSI).

2. Inspect the magazine for jammed nails or foreign objects that may hinder the nail feed.

3. Ensure the nails used are the correct length and type (20-22-degree plastic collated round head framing nails).

4. Lubricate the nailer with pneumatic tool oil regularly.

5. Verify that the depth adjustment setting is appropriate for the material.

Conclusion

The Campbell Hausfeld Framing Nailer NS349000 is a reliable and versatile tool for various carpentry applications. This article has provided you with the technical details, operational instructions, and maintenance tips needed to use the nailer effectively and safely. By following these guidelines, you can make the most of your NS349000 and ensure its long-lasting performance.