Introduction

Loading a Bostitch nail gun, especially the SB-1664FN model, is a simple but critical process to ensure safe and efficient operation. In this guide, we’ll provide precise step-by-step instructions on how to correctly load nails into your Bostitch SB-1664FN nail gun. Whether you’re a professional tradesperson or a DIY enthusiast, this guide will help you get your nail gun ready for your next project.

Safety First

Before we start, safety should be your priority:

1. Safety Glasses: Always wear safety glasses to protect your eyes from potential flying debris.
2. Work Area: Ensure you’re working in a well-ventilated area and that there are no people in your immediate line of fire.
3. Disconnect: If your nail gun is pneumatic, disconnect it from the air supply; if it’s electric, unplug it.

Step 1: Gather Your Nails

Begin by collecting the nails that are compatible with your Bostitch SB-1664FN nail gun. Ensure they are the correct type and size as specified in your nail gun’s user manual, and make sure the nail heads are oriented uniformly.

Step 2: Open the Magazine

Most Bostitch nail guns, including the SB-1664FN, have a magazine that needs to be opened for nail loading. Consult your user manual to locate and open the magazine. Usually, it involves releasing a latch or lever.

Step 3: Load the Nails

Place the nails into the magazine, ensuring they align with the feed path, and that the nail heads face outward. Be mindful of the magazine’s capacity to avoid jams. Ensure that the nails are held securely within the magazine.

Step 4: Close the Magazine

After loading the nails, securely close the magazine. Make sure that the nails are properly held in place and can feed smoothly into the nail gun’s chamber.

Step 5: Test Nail Feeding

With the nail gun’s power source disconnected (for electric models) or the air supply disconnected (for pneumatic models), perform a test to ensure the nails feed correctly. Manually cycle the nail gun to confirm that nails advance smoothly from the magazine into the firing chamber.

Step 6: Connect Air Supply (if applicable)

For pneumatic nail guns, like the SB-1664FN, connect the tool to a suitable air compressor. Ensure the air pressure is within the recommended range as specified in the user manual.

Step 7: Safety Engagement

Before firing your Bostitch SB-1664FN nail gun, engage any safety mechanisms required by your specific model. Typically, this involves pressing a safety tip against the work surface.

Step 8: Fire the Nail Gun

With the nail gun properly positioned, squeeze the trigger to fire the nail. The nail should be driven into the workpiece with force. Release the trigger to reset the nail gun for the next nail.

Step 9: Continue Installation

Repeat the firing process for each nail you intend to install. Ensure proper aim and safety engagement for each shot. Always adhere to safety guidelines when operating your nail gun.

Conclusion

Properly loading your Bostitch SB-1664FN nail gun is essential for a safe and efficient operation. By following these straightforward steps, you can confidently prepare your nail gun for a variety of carpentry and construction tasks. Remember to consult your nail gun’s user manual for specific details, and always prioritize safety when working with this powerful tool.