Bostitch nail guns are renowned for their reliability and durability. However, like any mechanical tool, they can experience issues that require a reset. In this guide, we’ll provide clear and concise steps on how to reset a Bostitch nail gun, whether it’s jammed, misfiring, or not working as expected.

Before You Begin: Safety First

Prioritize safety when working with power tools:

1. Disconnect the nail gun from the air compressor or power source.

2. Wear safety goggles and gloves to protect your eyes and hands.

3. Perform the reset process in a well-ventilated area.

Step 1: Identify the Issue

Before resetting your Bostitch nail gun, it’s crucial to understand the specific issue you’re facing. Common problems include jammed nails, misfires, and air leaks. Knowing the problem will help you target the reset process accurately.

Step 2: Clear Jams

If your nail gun is jammed, follow these steps to clear the jam:

1. Disconnect the nail gun from the power source.

2. Remove any remaining nails from the magazine.

3. Open the nail gun’s nose piece or magazine cover, depending on the model.

4. Carefully clear any jammed nails or debris using needle-nose pliers or a flathead screwdriver. Be gentle to avoid damaging the nail gun.

5. Close the nose piece or magazine cover and reattach the nail gun to the power source.

Step 3: Address Misfires

If your Bostitch nail gun is misfiring or not driving nails correctly, try the following:

1. Ensure you’re using the correct nail type and size for your nail gun model. Using the wrong nails can cause misfires.

2. Check the air pressure from the compressor. Ensure it’s within the recommended range for your specific nail gun.

3. Inspect the driver blade for any damage or wear. If it’s damaged, it may need replacement.

4. Lubricate the nail gun with pneumatic tool oil according to the manufacturer’s recommendations. Proper lubrication can help prevent misfires.

Step 4: Troubleshoot Air Leaks

If you suspect an air leak in your Bostitch nail gun, follow these steps:

1. Disconnect the nail gun from the power source.

2. Examine all air hoses and connections for visible damage or loose fittings. Tighten any loose connections or replace damaged hoses.

3. Apply soapy water to potential air leak areas and look for bubbles. If bubbles form, it indicates an air leak.

4. Seal any detected leaks with the appropriate sealant or replace damaged components.

Step 5: Test Your Nail Gun

After addressing the identified issue, reconnect your nail gun to the power source and conduct a test firing into a safe target or surface to ensure that it’s functioning correctly.

Conclusion

Resetting a Bostitch nail gun is often a straightforward process, but it requires careful attention to detail and safety. By identifying the issue and following the appropriate steps for clearing jams, addressing misfires, or troubleshooting air leaks, you can quickly get your nail gun back in working order. Always refer to the manufacturer’s documentation for your specific Bostitch nail gun model for any model-specific troubleshooting or maintenance instructions.