The Senco FinishPro 35 Nail Gun is a versatile tool that can handle a wide range of finishing tasks. In this manual, we will provide a clear and concise guide to using the Senco FinishPro 35 Nail Gun, making it accessible for both technical experts and beginners.

Table of Contents

1. Introduction to the Senco FinishPro 35 Nail Gun
2. Safety Precautions
3. Basic Components and Features
4. Setting Up Your Senco FinishPro 35
5. Loading Nails
6. Adjusting Depth of Drive
7. Operating the Nail Gun
8. Maintenance and Troubleshooting
9. Conclusion

1. Introduction to the Senco FinishPro 35 Nail Gun

The Senco FinishPro 35 Nail Gun is designed for precision and efficiency in finishing applications. It’s a reliable tool for tasks like installing baseboards, crown molding, cabinets, and more. This manual will guide you through its setup, operation, and maintenance.

2. Safety Precautions

Safety is a top priority when using any tool. Before operating the FinishPro 35, ensure you:

• Wear Safety Gear: Always use safety glasses and hearing protection.
• Disconnect Power: Disconnect the air supply when not in use.
• Keep Hands Clear: Keep your hands away from the nailing area.
• Read the Manual: Familiarize yourself with the manual for the specific model of the FinishPro 35 you are using.

3. Basic Components and Features

The Senco FinishPro 35 Nail Gun typically consists of the following components:

• Nail Magazine: Holds the nails.
• Safety Contact Mechanism: Prevents accidental firing.
• Depth-of-Drive Adjustment: Controls how deep the nail is driven.
• Exhaust Port: Directs air away from the user.
• Air Inlet: Connects to the air supply.

4. Setting Up Your Senco FinishPro 35

• Connect Air Supply: Attach an air hose with the recommended pressure range of 70-120 PSI to the air inlet.
• Lubrication: Apply a few drops of pneumatic tool oil to the air inlet.
• Secure Workpiece: Ensure the workpiece is firmly held in place.

5. Loading Nails

1. Open the nail magazine.
2. Insert a strip of finish nails into the magazine, ensuring they are aligned properly.
3. Close the magazine.

6. Adjusting Depth of Drive

• To set the depth of drive, turn the depth-of-drive adjustment dial on the nail gun.
• Test on a scrap piece of material to achieve the desired depth.

7. Operating the Nail Gun

1. Place the nail gun squarely on the workpiece.
2. Press the safety contact against the workpiece.
3. Squeeze the trigger to drive the nail.
4. Release the trigger and safety contact before moving the nail gun.

8. Maintenance and Troubleshooting

• Regular Cleaning: Remove dust and debris from the nail gun.
• Lubrication: Apply pneumatic tool oil regularly.
• Inspections: Check for loose screws or damaged parts. Replace or repair as needed.

Troubleshooting: If you encounter issues, consult the user manual or contact Senco customer support.

9. Conclusion

The Senco FinishPro 35 Nail Gun is a valuable tool for finishing tasks. By following this manual, you can safely and effectively operate the nail gun, ensuring accurate and efficient results. Always prioritize safety, proper maintenance, and refer to the specific user manual for your model for more in-depth information.