Bostitch framing nailers are robust and reliable tools, but like any mechanical device, they can occasionally jam. A jammed nailer can be frustrating, but with the right knowledge and steps, it’s a problem that can be swiftly resolved. Here’s a clear and concise guide on how to unjam your Bostitch framing nailer.
**1. Safety First:
Before attempting to clear a jam, ensure the nailer is disconnected from its power source (remove the battery or disconnect the air hose) to prevent accidental firing. Wear safety goggles to protect your eyes from any flying debris.
**2. Identify the Jam:
Determine whether the jam is in the magazine or the nosepiece. If nails are stuck in the magazine, remove them. If the jam is in the nosepiece, proceed to the next step.
**3. Clearing a Magazine Jam:
-
Empty the Magazine: Remove any nails remaining in the magazine. Inspect for bent or damaged nails; discard them.
-
Check the Follower: Ensure the follower (the part pushing the nails) moves freely. If it’s stuck, lubricate it with a silicone-based lubricant.
-
Reload Properly: Reload the magazine with the correct nail size and type. Misaligned or wrong-sized nails can cause jams.
**4. Clearing a Nosepiece Jam:
-
Release Pressure: If using a pneumatic nailer, release any air pressure in the nailer. For cordless models, remove the battery.
-
Access the Jammed Nail: Using an Allen wrench, remove the screws securing the nosepiece. Gently pry open the nosepiece to access the jammed nail.
-
Remove the Jammed Nail: Using needle-nose pliers, carefully grip and remove the jammed nail. Check for any remaining pieces and clear them out.
-
Inspect the Driver Blade: Ensure the driver blade (the part that strikes the nail) is not bent or damaged. If it is, it might need replacement.
**5. Reassemble and Test:
-
Reassemble the Nailer: Securely fasten the nosepiece with the screws. Make sure everything is tightly assembled.
-
Test the Nailer: Reconnect the power source and fire a few test nails into a scrap material to ensure the nailer is functioning correctly.
Conclusion:
Unjamming your Bostitch framing nailer is a straightforward process that requires attention to detail and safety precautions. By following these steps, you can quickly and efficiently resolve jams, ensuring your nailer continues to perform at its best.
Always consult your nailer’s user manual for specific instructions and, if you encounter difficulties, consider seeking assistance from a professional or the manufacturer’s customer support. With proper maintenance and timely resolution of jams, your Bostitch framing nailer will remain a reliable tool for all your framing needs.