Paslode Cordless Finish Nailer Repair: A Comprehensive Guide

If you’re a contractor, construction worker, or DIY enthusiast, you know the value of a reliable finish nailer. The Paslode Cordless Finish Nailer is a workhorse in the industry, but like all tools, it may require repair from time to time. In this comprehensive guide, we’ll explore the common issues that can arise with the Paslode Cordless Finish Nailer and provide step-by-step instructions on how to tackle these repairs. With the right knowledge and a few tools, you can keep your Paslode nailer in top shape.

Introduction to the Paslode Cordless Finish Nailer

Before we dive into repair procedures, let’s get acquainted with the Paslode Cordless Finish Nailer. This cordless nailer is favored for its mobility and convenience. It’s perfect for a wide range of finish applications, including crown molding, baseboards, and door casings. The cordless design eliminates the need for hoses and cords, providing the freedom to move around the job site with ease.

Troubleshooting Common Issues

1. Nailer Misfires

Misfires can be frustrating, but they’re a common issue with nailers. If your Paslode Cordless Finish Nailer is misfiring, consider the following troubleshooting steps:

  • Check Fuel Cell: Ensure the fuel cell is correctly installed and not empty. Misfires can occur if there’s insufficient fuel.

  • Inspect Battery: Confirm that the battery is fully charged. Low battery power can lead to misfires.

  • Clean the Nailer: Dust and debris can accumulate in the nailer, affecting its performance. Regularly clean the nailer to prevent misfires.

  • Examine Nails: Inspect the nails for any defects or damage. Damaged nails can lead to misfires.

2. Nail Jams

Nail jams are another common issue that can disrupt your work. To address nail jams in your Paslode Cordless Finish Nailer:

  • Release the Magazine: Open the magazine and remove any nails that may be jammed.

  • Check the Depth Adjustment: Ensure the depth adjustment is properly set. Nails driven too deep or too shallow can cause jams.

  • Examine the Nosepiece: The nosepiece should be clear of obstructions. Clear any debris or stuck nails.

3. Loss of Power

If your Paslode Cordless Finish Nailer is losing power or not driving nails effectively, consider these solutions:

  • Battery Check: Ensure the battery is fully charged. A weak battery can result in a loss of power.

  • Fuel Cell Inspection: Check the fuel cell to ensure it’s not empty. A depleted fuel cell can lead to a lack of power.

  • Clean the Tool: Regular cleaning can help maintain the nailer’s efficiency. Pay attention to the fan and combustion chamber, as clogs can affect power.

Repairing the Paslode Cordless Finish Nailer

1. Replacing the Battery

If your nailer is losing power, replacing the battery might be necessary. Follow these steps:

  • Remove the old battery by pressing the release buttons on both sides.

  • Insert the new, fully charged battery and ensure it clicks into place securely.

2. Replacing the Fuel Cell

For issues related to fuel supply, replacing the fuel cell is the solution. Here’s how:

  • Open the nailer’s fuel cell compartment.

  • Remove the old fuel cell and insert a new one, making sure it’s securely in place.

  • Close the fuel cell compartment.

3. Cleaning the Nailer

Regular cleaning can prevent many issues. Use compressed air to blow out dust and debris from the nailer’s internal components.

4. Adjusting Depth

If your nailer is driving nails too deep or too shallow, adjust the depth setting according to your project’s requirements.


The Paslode Cordless Finish Nailer is a reliable tool that can last for years with proper care and maintenance. By troubleshooting and addressing common issues like misfires, nail jams, and power loss, you can keep your nailer performing at its best. If more extensive repairs are required, consult the manufacturer’s instructions or seek the expertise of a professional. With this guide, you’re well-equipped to tackle common Paslode Cordless Finish Nailer repairs and keep your projects on track.

Leave a Reply

Your email address will not be published. Required fields are marked *