
The Porter Cable Framing Nailer FR350A is a powerful and versatile tool that’s commonly used in construction and woodworking. Whether you’re a professional contractor or a DIY enthusiast, understanding how to properly use and maintain this tool is essential. In this article, we will provide you with a comprehensive manual for the Porter Cable Framing Nailer FR350A, covering its technical details, usage, and maintenance.
Table of Contents:
- Technical Specifications
- Loading Nails
- Operating the Nailer
- Depth Adjustment
- Jam Clearing
- Maintenance and Cleaning
- Safety Precautions
1. Technical Specifications
- Model: Porter Cable FR350A
- Power Source: Pneumatic (requires an air compressor)
- Nail Type: 20-22 degree plastic collated round head framing nails
- Nail Length: 2" to 3-1/2"
- Nail Diameter: 0.113" to 0.148"
- Magazine Capacity: 60 nails
- Operating Pressure: 70-120 PSI
- Weight: 7.3 pounds
- Warranty: 3-year limited
2. Loading Nails
To load nails into your Porter Cable FR350A:
- Disconnect the nailer from the air supply.
- Slide the latch on the magazine cover, located at the rear of the nailer, to open the magazine.
- Place the nails into the magazine with the nail heads facing outward.
- Close the magazine cover securely.
3. Operating the Nailer
- Connect the nailer to the air compressor using a suitable air hose.
- Adjust the air compressor’s pressure to the recommended operating pressure of 70-120 PSI.
- Point the nailer’s nose at the desired nailing location.
- Depress the safety contact with the nose of the nailer against the work surface.
- Pull the trigger to drive a nail into the material.
4. Depth Adjustment
To adjust the depth of drive:
- Turn the depth adjustment dial on the nailer. Turning it clockwise increases depth, while turning it counterclockwise decreases depth.
5. Jam Clearing
If a nail becomes jammed:
- Disconnect the nailer from the air supply.
- Open the magazine cover.
- Remove any jammed nails and clear any debris from the magazine and nose area.
- Close the magazine cover securely.
6. Maintenance and Cleaning
Regular maintenance ensures optimal performance:
- Apply a few drops of pneumatic tool oil into the air inlet daily.
- Clean the nailer’s exhaust vents to prevent dust buildup.
- Inspect all moving parts for wear or damage regularly and replace them as needed.
7. Safety Precautions
- Always wear safety glasses and hearing protection.
- Keep your hands and body clear of the nailer’s nose.
- Do not carry the nailer with your finger on the trigger.
- Disconnect the air supply when not in use.
- Follow all safety and operating instructions provided in the user manual.
Conclusion
The Porter Cable Framing Nailer FR350A is a valuable tool for various nailing applications. Understanding its technical specifications, proper nail loading, operating procedures, and maintenance requirements is crucial for both safety and performance. By following the guidelines provided in this manual, you can confidently use your FR350A and ensure it remains a reliable asset in your arsenal of tools. Always prioritize safety and proper maintenance to extend the life of your nailer and complete your projects with efficiency and precision.